There are a number of pump types available in the market and understanding which type suits to your requirement is very important to search out a perfect solution in the market. Your right selection will help you to keep your operating cost low and extend life of the pump body.
Repairinindia, a fastest growing pump maintenance service provider market leader made a simple list of some of the high demand industrial pumps all along their applications and shared the information below. In addition, this post has described enough information to give you an idea about the pump bodies, but for the better understanding advantages and disadvantages you need to check with the sales executive or any other technical person so that you can better understand about the selected pump body.
Industrial Pumps Types
AODD Pumps:
These pumps are also known as Air Operated Double Diaphragm Pumps. They have a number of plus points which make them the perfect choice for a variety of applications at industrial level. The most important fact is that they can handle liquids with up to 90 % solids without any problem.
Axial Flow Pumps:
They can be used for producing higher flow rates, because an impeller with vanes direct liquids to flow axially. However created pressure always remains less in comparison to the flow produced by centrifugal pumps.
Pressure Booster Pumps:
Pressure booster pumps are used to increase additional pressure in an existing system that is carrying liquid from one place to another. Their working principal is like centrifugal pumps and are installed in combination with vertical turbine system to boost the pressure.
Centrifugal Pumps:
When you just need to uplift thin or very low viscosity liquids with high flow in your industry, centrifugal pumps are the best choice. In addition, these pumps also use a multi number of impellers to create high energy and move the liquid fast through a piping system from one location to another.
Close Coupled Pumps:
They are very simple pump bodies with less installation problems. All the parts of these pumps are closely coupled and offers advantages like you need not to spend your money and time for doing coupling alignment.
Cryogenic Pumps:
For handling very low temperature liquids Cryogenic Pumps are the best solutions.
Canned Motor Pumps:
Canned motor pumps contains a hermetically sealed chamber that ensures zero leakage during the pumping of hazardous liquids or chemicals in chemical industries.
Cantilever Pumps:
These types of pumps are meant to be installed in the sump or liquid tank directly. No bearing is required in the lower part of the pump body as the impeller is cantilevered from the motor.
Dosing Pumps:
Dosing pumps maintain accurate flow rate and can be adjusted manually.
Chopper Pumps:
These pumps can be used to move solids-laden liquids in the industries. They are efficient to chop the solids to move them easily into the piping system.
Turbine Pumps:
When you need to draw out the liquids from deep wells, turbine pumps are the best solutions. They can be submerged in the liquids directly.
Vacuum Pumps:
They can pull gas, air or other liquids by producing a partial vacuum.
These are some of the types of pumping systems, mostly used in industries to compress and transfer of fluids! There are many other types of pumping systems about which Repairinindia will describe in the next article.
No comments:
Post a Comment